Eizo FlexScan S1501 Bedienungsanleitung PDF herunterladen (Seite 25)

Chapter 5 Reference

5-1 Attaching an Arm

The stand can be removed and replaced with an arm (or another stand) to be

attached to the monitor. Use an arm or stand of EIZO option.

[Attaching]

Lay the LCD monitor on a soft cloth spread over on a stable

surface with the panel surface facing down.

Remove the stand. (Prepare a screwdriver.)

Unscrew the four screws securing the unit and the stand with the

screwdriver.

Attach the monitor to the arm or stand.

Secure the monitor to the arm or stand using the screws speciﬁ ed in the

user’s manual of the arm or stand.

• Clearance between the screw holes when attach an arm or stand:

In case of 75mm × 75mm

• Clearance between the screw holes when attach an arm or stand:

In case of 100mm × 100mm

Attention

• When attaching an arm or stand,

follow the instructions of their user’s

manual.

• When using another manufacturer’s

arm or stand, conﬁ rm the following in

advance and select one conforming to

the VESA standard. Use M4 × 12 mm

screws supplied with the monitor.

– Clearance between the screw holes:

75 mm × 75 mm or

100 mm × 100 mm

– Thickness of plate: 2.6 mm

– Strong enough to support weight of

the monitor unit (except the stand)

and attachments such as cables.

• When using an arm or stand, attach it

to meet the following tilt angles of the

monitor.

– Up 60 degrees, down 45 degrees

(horizontal display)

– Up 45 degrees, down 45 degrees

(vertical display, 90 degrees

clockwise)

• Connect the cables after attaching an

arm.

S1501_UM_EN.indd 23S1501_UM_EN.indd 23 5/28/2007 5:12:45 PM5/28/2007 5:12:45 PM

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 34 35

Kommentare zu diesen Handbüchern

Keine Kommentare

Eizo FlexScan S1501 Bedienungsanleitung Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fernseher & Monitore Eizo FlexScan S1501