Eizo FlexScan S1703 Bedienungsanleitung PDF herunterladen (Seite 35)

Chapter 5 Reference

5-4Glossary

Clock

The analog signal input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics

system in use, when the analog signal is converted to a digital signal for image display. This is called clock

adjustment. If the clock pulse is not set correctly, some vertical bars appear on the screen.

DDC/CI(DisplayDataChannel/CommandInterface)

VESA provides the standardization for the interactive communication of the setting information, etc. between a PC

and the monitor.

DVI(DigitalVisualInterface)

DVI is a digital interface standard. DVI allows direct transmission of the PC’s digital data without loss.

This adopts the TMDS transmission system and DVI connectors. There are two types of DVI connectors. One is

a DVI-D connector for digital signal input only. The other is a DVI-I connector for both digital and analog signal

inputs.

DVIDMPM(DVIDigitalMonitorPowerManagement)

DVI DMPM is a digital interface power saving function. The “Monitor ON (operating mode)” and “Active Off (power

saving mode)” are indispensable for DVI DMPM as the monitor’s power mode.

Gain

This is used to adjust each color parameter for red, green and blue. An LCD monitor displays the color by the light

passing through the panel color lter. Red, green and blue are the three primary colors. All the colors on the screen

are displayed by combining these three colors. The color tone can be changed by adjusting the light intensity (volume)

passing through each color’s lter.

Phase

Phase means the sampling timing to convert the analog input signal to a digital signal. Phase adjustment is made to

adjust the timing. It is recommended that phase adjustment be made after the clock is adjusted correctly.

RangeAdjustment

Range adjustment controls the signal output levels to display every color gradation. It is recommended that range

adjustment be made before color adjustment.

Resolution

The LCD panel consists of numerous pixels of specied size, which are illuminated to form images. This monitor

consists of horizontal 1280 pixels and 1024 vertical pixels. At a resolution of 1280 × 1024, all pixels are illuminated

as a full screen (1:1).

sRGB(StandardRGB)

International standard for color reproduction and color space among peripheral devices (such as monitors, printers,

digital cameras, scanners). As a form of simple color matching for the Internet, colors can be displayed using tones

close to those of the transmission and reception devices.

Sync-on-Green

A composite horizontal and vertical signal sync for the green signal in RGB. Typically, monitors use 5 signals, one for

red, green and blue, and one for each horizontal and vertical sync. Sync-on-green monitors utilize three connections,

one for red, one for blue and two synced horizontal and vertical signals that are counted as one green video signal.

Temperature

Color temperature is a method to measure the white color tone, generally indicated in degrees Kelvin. The screen

becomes reddish at a low temperature, and bluish at a high temperature, like the ame temperature.

5000 K: Slightly reddish white

6500 K: White referred to as daylight-balanced color

9300 K: Slightly bluish white

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 53 54

Kommentare zu diesen Handbüchern

Keine Kommentare

Eizo FlexScan S1703 Bedienungsanleitung Seite 35

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fernseher & Monitore Eizo FlexScan S1703