Eizo FlexScan L353T-C Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Monitore Eizo FlexScan L353T-C herunter. Eizo FlexScan L353T-C User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken

Inhaltsverzeichnis

Seite 1 - User’s Manual

User’s Manual Touch Panel Color LCD Monitor It shall be assured that the final system is in compliance to IEC60601-1-1 requirements.

Seite 2 - CAUTION

English 1-3. Controls & Connectors Front S I G .S I G .AUTOAUTOENT.ENT.(4) (5)(6)(7)(8)(3)(1)(2)SIG.AUTOENT. Control Panel (1) ScreenManager® (2)

Seite 3 - TABLE OF CONTENTS

English Rear (10)(9)(11)(12)(14)(15)(16)POWER INPUTDVID-SUB(13) Bottom (9) Power Connector (10) USB Port (Upstream) (11) External line in

Seite 4 - PRECAUTIONS

English 2. CABLE CONNECTION 2-1. Before connecting Before connecting your monitor to the PC, change the display screen settings (resolution (p.41) an

Seite 5 - WARNING

English 2-2. Connecting the signal cable NOTE • Be sure that the power switches of both the PC and the monitor are OFF. 1. Plug the signal cable int

Seite 6

English 2. Plug the power cord into the power connector on the rear of the monitor. Then, plug the other end of the cord into a power outlet. WARNIN

Seite 7 - CAUTION

English NOTE • Whenever finished, turn off the PC and the monitor. Touch operation is effective until turning off both PC and monitor. • For the

Seite 8

English 2-4. Sound Connections NOTE • Always switch the monitor and audio devices or computers off whenever connecting or disconnecting any audio de

Seite 9 - 1. INTRODUCTION

English 3. ScreenManager 3-1. How to use the ScreenManager S I G .S I G .AUTOAUTOENT.ENT.SIG.AUTOENT. 1. Entering the ScreenManager Press the Enter B

Seite 10 - English

English 3-2. Adjustments and Settings The following table shows all the ScreenManager’s adjustment and setting menus. “*” indicates adjustments of an

Seite 11

English 3-3. Useful Functions Adjustment Lock Use the “Adjustment Lock” function to prevent any accidental changes. Locked function • Auto Adjustment

Seite 12 - 2. CABLE CONNECTION

English SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to

Seite 13 - 1. Signal Cable

English EIZO Logo disappearing function When switching on the Power Switch on the control panel, the EIZO logo is displyed for a while. If you desire

Seite 14

English 4. ADJUSTMENT The monitor displays the digital input image correctly based on its pre-setting data. Adjust the brightness (p.24). 4-1. Scre

Seite 15 - Selecting the active input

English 2. We recommend setting the desktop pattern to that as shown in the diagram below. NOTE • More precise adjustment is available for using

Seite 16 - 2-4. Sound Connections

English (3) The screen position is incorrect. → Use the <Position> adjustment. The correct displayed position of the monitor is decided bec

Seite 17 - 3. ScreenManager

English 6. To Set the Brightness of the screen. → Use the <Brightness> adjustment. The brightness of the entire screen is controlled by chan

Seite 18

English 4-2. Color Adjustment The <Color> menu in the ScreenManager enables to change the color of the screen. By using the <Color Mode>

Seite 19 - 3-3. Useful Functions

English Color Mode Menu Custom sRGB Function Descriptions Adjustable range To change the saturation -128 ∼ 127 Setting the minimum level (-128) tu

Seite 20

English 4-3. Power-save Setup The <PowerManager> menu in the ScreenManager enables to set the power-save setup. NOTE • Do your part to conserv

Seite 21 - 4. ADJUSTMENT

English Power save for speaker When the monitor is in the power-saving mode, sound of speaker also erases simultaneously can be performed. [Procedure

Seite 22

English 5. ATTACHING A STAND The LCD monitor can be used with other stand by removing the tilt stand and attaching the stand to the LCD monitor. NOTE

Seite 23

English TABLE OF CONTENTS PRECAUTIONS ...4 1. INTRODUCTION ...

Seite 24

English 6. TROUBLESHOOTING If a problem persists even after applying the suggested remedies, contact an EIZO dealer. • No picture problems : See No

Seite 25 - 4-2. Color Adjustment

English Problems Points to check with possible solutions 3. Display position is incorrect.  Adjust the image position using the <Position>

Seite 26

English Problems Points to check with possible solutions 10. The <Smoothing> cannot be selected.  <Smoothing> is disabled when the scr

Seite 27 - 4-3. Power-save Setup

English • Touch Panel problems Problems Points to check with possible solutions 14. Cursor is jittery. / Drawing lines are not straight and smooth

Seite 28 - Power save for speaker

English 7. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. NOTE • Never use thinner

Seite 29 - 5. ATTACHING A STAND

English 8. SPECIFICATIONS L363T-C LCD Panel 38 cm (15.0 inch), TFT color LCD panel with Anti-Glare Hard Coating, Viewing Angle: H: 170°, V: 170°

Seite 30 - 6. TROUBLESHOOTING

English Temperature Operating: 0 °C ~ 35 °C (32 °F ~ 95 ° F) Storage: -20 °C ~ 60 °C (-4 °F ~ 140 ° F) Humidity 30% to 80% R.H. Non-condensing En

Seite 31

English L353T-C LCD Panel 38 cm (15.0 inch), TFT color LCD panel with Anti-Glare Hard Coating, Viewing Angle: H: 150°, V: 160° (CR≥5) Response Ti

Seite 32

English Temperature Operating: 0 °C ~ 35 °C (32 °F ~ 95 ° F) Storage: -20 °C ~ 60 °C (-4 °F ~ 140 ° F) Humidity 30% to 80% R.H. Non-condensing En

Seite 33

English Default settings Analog input Digital input Brightness 100% Smoothing 3 Temperature Off (normal white: approx. 6500 K) PowerManager VESA

Seite 34 - 7. CLEANING

English PRECAUTIONS IMPORTANT! • This product has been adjusted specifically for use in the region to which it was originally shipped. If operated ou

Seite 35 - 8. SPECIFICATIONS

English Pin Assignment D-Sub mini 15 pin connector Pin No.Signal Pin No.Signal Pin No. Signal 1 Red video 6 Red ground 11 Ground Shorted 2 Green

Seite 36 - 8. SPECIFICATIONS

English 9. GLOSSARY Clock With the analog input signal display, the analog signal is converted to a digital signal by the LCD circuitry. To convert t

Seite 37 - L353T-C

English Phase The phase adjustment decides the sampling timing point for converting the analog input signal to a digital signal. Adjusting the phase

Seite 38

APPENDIX/ANHANG/ANNEXE Preset Timing Chart for Analog input Timing-Übersichten für Analog Eingang Synchronisation des Signaux pour Analog numerique

Seite 39 - Optional

For U.S.A, Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 Warland D

Seite 40 - USB Port

Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standa

Seite 41 - 9. GLOSSARY

Recycle Auskunft Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland zusammen mit dem Partner eds-r gmbh rucknahmesysteme.

Seite 43 - APPENDIX/ANHANG/ANNEXE

English WARNING If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections imm

Seite 44 - Canadian Notice

English WARNING To avoid danger of suffocation, keep the plastic packing bags away from babies and children. Use the enclosed power cord and con

Seite 45

English WARNING When attaching an arm stand, please refer to the user’s manual of the arm stand and install the unit securely with the enclosed s

Seite 46

English CAUTION Use an easily accessible power outlet. This will ensure that you can disconnect the power quickly in case of a problem. Periodica

Seite 47

English 1. INTRODUCTION Thank you very much for choosing an EIZO Color Monitor. 1-1. Features • Dual inputs compliant • DVI (p.41) Digital input

Verwandte Modelle: FlexScan L363T-C

Kommentare zu diesen Handbüchern

Keine Kommentare